Carbon / Hydrogen / Sulfur Analyzer – CHS-580

Carbon / Hydrogen / Sulfur Analyzer – CHS-580

The CHS-580 is designed for the rapid and accurate simultaneous determination of carbon, hydrogen and sulphur in materials such as coal, coke, ores, minerals, slags etc.

Information and Specifications on CHS-580


[wpcol_1half id=”” class=”” style=””]

[/wpcol_1half][wpcol_1half_end id=”” class=”” style=””]

[/wpcol_1half_end]

The CHS-580 incorporates the latest technology. It is designed for the rapid simultaneous determination of carbon, hydrogen and sulfur in materials such as coal, coke, ores, minerals, slags, etc.

 

Carbon / Hydrogen / Sulfur Analyzer – CHS-580A

ELTRA’s 580A analyzers (A = Autoloader) are equipped with an automatic sample loader, allowing for analysis of large numbers of samples without operator intervention. The sample loader is available in two versions to accommodate 36 or 130 crucibles. The CHS-580A is based on the technology of the CHS-580 analyzer and features a vertical resistance furnace with ceramic tube.

The temperature can be set in steps of 1 °C to a maximum of 1,550 °C. Thanks to sample weights of up to 500 mg and more even inhomogeneous materials can be reliably analyzed. The analyzer can be equipped with up to three independent infrared cells according to the user’s requirements, allowing for a great variety of applications.

ELTRA’s CHS-580A is the ideal analyzer for the simultaneous determination of carbon, hydogen and sulfur in organic samples.

Information and Specifications on CHS-580A


[wpcol_1half id=”” class=”” style=””]

CHS-580A

[/wpcol_1half]

[wpcol_1half_end id=”” class=”” style=””]

  • simultaneous carbon, sulfur and hydrogen determination with minimal sample preparation
  • wide range of organic materials can be analyzed
  • rapid, precise, accurate and reliable element determination
  • resistance furnace can be set up to 1550 °C in steps of 1 °C
  • customized infrared cells provide wide, dynamic measuring range
  • powerful software (multilingual, customized display, export of results)
  • single and multipoint calibration
  • low maintenance
  • robust design allows usage in production control and laboratory

[/wpcol_1half_end]

Operation CHS-580A

In the CHS-580A the samples are weighed into crucibles. Then a gripper places the samples from the Autoloader on the pedestal. The samples are loaded consecutively into the furnace for combustion. The average analysis time is 60 to 180 seconds. Detector signals and instrument parameters are displayed during analysis. Evaluation of the signals and display of the results are done automatically; the data can be transferred to a laboratory information management system (LIMS). The analyzers require minimum maintenance. The particle filters and chemicals which need to be maintained are easily accessible.

Measuring Principle CHS-580A

In the CHS-580A analyzer the sample is burnt in an oxygen atmosphere at temperatures of up to 1,550 °C. The furnace temperature can be freely selected in steps of 1 °C. The combustion gasses (CO2, H2O, SO2) coming from the furnace first pass through a dust filter and then into the heated H2O infrared cell. After the water vapor is chemically absorbed, the dried CO2 and SO2 gas is detected in the additional infrared cells. Depending on the configuration, it is possible to combine up to four infrared cells with different sensitivities.

Brochures
Product Overview
CS-580 / CS-580A, CHS-580 / CHS-580A

COMPLIMENTARY CONSULTATION

At Romquest we know your time is precious, and choosing the right equipment for your application, reliable and cost-efficient over the long term, in your budget range, can be difficult. That’s why we’re investing our time to showcase what our products can do for you! We’re available to chat by phone or Skype, and encourage you to take advantage of personal demonstrations at the Romquest office.

PRODUCT CATEGORIES

Receive regular product updates, get discounts, read blog posts updates, access training sessions