Elemental Analysis of Metal Powders and Metal Parts Produced by Additive Manufacturing
Introduction An integral part of industrial product development is the manufacture of prototypes and initial samples, regardless whether the product is a simple screw or
Carbon & Sulfur Determination in Steel Plants and Foundries with ELTRA’s ELEMENTRAC CS-i Analyzer
IntroductionSteel plants observe the decreasing carbon content during the whole steel production process from raw iron with up to 4-5 % carbon to a few
Effective Quality Control of Steel and Iron Products with Combustion Analysis
Introduction The element concentration of carbon (C), sulfur (S), hydrogen (H), nitrogen (N), and oxygen (O) in iron products, such as steel, have a significant
40 YEARS OF INNOVATION AND PRECISION IN ELEMENTAL ANALYSIS
The development of the first carbon and sulfur analyzer in 1981 marked the beginning of ELTRA’s success story 40 years ago. From day one, the
Rental Programs – All the Technologies for Quality Assurance in Foundries
Download Flyer
RAPID AND RELIABLE OXYGEN / NITROGEN / HYDROGEN ANALYSIS IN SOLID SAMPLES WITH THE NEW ELEMENTRAC ONH-P 2
With the ELEMENTRAC ONH-p 2, ELTRA presents a powerful and robust elemental analyzer for measuring oxygen, nitrogen and hydrogen concentrations in inorganic samples such as
Rigaku analytical devices presents latest metal alloy analysis solutions at IMTS Spark
Rigaku Analytical Devices is showcasing its handheld KT-100S LIBS analyzer for metal alloy analysis in the International Manufacturing Technology Show (IMTS) Spark Showroom Wilmington, MA
The Romquest Advantage
Romquest Technologies and Alpha Canada Inc. are exclusive Canadian distributors for reputable manufacturers of high quality analyzers and consumables from Germany, USA and Australia: Download
Rigaku Demonstrates Improved Handheld LIBS Capabilities for Quality Assurance at FABTECH 2019
The Rigaku family of handheld analyzers, for use in the metal forming, fabricating, welding and finishing industries, is presented at FABTECH 2019 11/11/19, 06:25 AM
A KEY TO SUCCESS WITH LIBS: SAMPLE PREPARATION
The metal found in industrial environments is usually dirty and oxidized. Good surface preparation is key for obtaining the most accurate and repeatable test results
Rigaku KT-100S Handheld LIBS
The Rigaku KT-100S Handheld LIBS is… FAST – 1-3 second measurement time SAFE – No Radiation, No Dosimetry, Less Regulation Lower Cost to Own –
ENSURING HIGH QUALITY IN THE ADDITIVE MANUFACTURING PROCESS
Additive manufacturing, as well as powder injection molding, offer great potential if the raw materials employed are of optimum quality. But the process needs to
NEW CARBON/SULFUR ANALYZER WITH DUAL FURNACE TECHNOLOGY
ELTRA’s new ELEMENTRAC CS-d analyzer is suitable for measuring C/S concentrations in both organic and inorganic sample materials When using conventional elemental analyzers for carbon
VERDER SCIENTIFIC COMPANIES PRESENT SOLUTIONS FOR ADDITIVE MANUFACTURING
In the brochure “Solutions for Additive Manufacturing & Powder Injection Molding”, the 6 companies present their offering The rapidly advancing technology of additive manufacturing opens
Carbon & Sulfur Determination in Steel Plants and Foundries
Different methods are applied to measure C/S concentrations in steel, iron-based products, or in typical foundry products, such as ferro chromium. Among them are multi-element
Effective Quality Control of Steel and Iron Products with Combustion Analysis
The element concentration of carbon (C), sulfur (S), hydrogen (H), nitrogen (N), and oxygen (O) in iron products, such as steel, have a significant influence
Elemental Analysis of Metal Powders and Metal Parts Produced by Additive Manufacturing
Additive manufacturing is becoming an increasingly established production technology. However, as it is still new, the required process steps have not been uniformly defined yet.
Fast and reliable C and S determination with elemental analyzers – a useful addition to XRF
Part of the production process of high quality cement is quality control of the raw materials as well as the intermediate and finished products. At
Quality Control of Coal with Elemental Analyzers
Coal is one of the most important fossil fuels. In 2012, the global stone coal output was about 6.6 billion metric tons [1]. A huge
Quality control of cement
Elemental analysers based on combustion technology are a useful addition to XRF analysis for the quality control of cement and related products, ensuring fast, precise and
Quality control of coal: The influence of sample preparation on elemental analysis results
The most common types of coal (lignite, bituminous and anthracite) are distinguished by their different chemical and physical properties. The calorific value of coal can
Sample prep and analysis of secondary fuels
With ever increasing socio-economic and geo-political demands, the use of secondary fuels in cement manufacture is a well-established practice for reducing both costs and CO2
Standard-compliant element analysis of silicon carbide and mixtures containing silicon carbide with combustion analyzers
Elemental analyzers are important tools for quality control of a wide range of products. A variety of matrices, such as ceramics, coal, steel or soil,
ELTRA Carbon and Sulfur Analyzer CS-2000 – Introduction video
ELTRA’s CS-2000 is the only analyzer on the market for the determination of carbon and sulfur in organic as well as inorganic samples. For this
ELTRA Oxygen, Hydrogen and Nitrogen Analyzer ONH-p – Introduction video
The ELEMENTRAC ONH-p determines oxygen, nitrogen and hydrogen in inorganic samples by inert gas fusion in an impulse furnace with temperatures in excess of 3.000
ELTRA ONHp Elemental Analyzer – Video
The elemental analyzer ELTRA ELEMENTRAC ONH-p determines oxygen, nitrogen and hydrogen in inorganic samples by inert gas fusion in an impulse furnace with temperatures in
The Elemental Analyzer CS-2000 – Video
The Elemental Analyzer CS-2000 is the only analyzer on the market for the determination of carbon and sulfur in organic as well as inorganic samples.
NEW: ELEMENTRAC® ONH-p
ELTRA presents the latest generation of ONH analyzers for the determination of oxygen, nitrogen and hydrogen in inorganic materials with a brand new design and
OPTIMASS 9500
OPTIMASS 9500 The new GBC OptiMass 9500 is the second generation state-of-the-art Time-of-Flight Mass Spectrometer. Simultaneous measurement of the entire mass range from 1 amu
Flexible and robust: Determination of C, H and S concentrations in organic sample materials with ELTRA’s CHS-580
ELTRA’s CHS-580 analyzer for the determination of carbon, sulfur and hydrogen concentrations in organic sample materials such as fuels, oil, chemicals, soil, or cement offers
