High-quality analyzers and consumables

CARBON / SULFUR ANALYZER CS‑r

For the safe, precise and reliable elemental analysis of carbon (C) and sulfur (S) in predominantly organic matrices such as soils, waste, wood, oil, coal and coke, ELTRA offers the combustion analyzer ELEMENTRAC CS-r with IR detection.

The CS-r with up to 4 infrared cells is designed for carbon and sulfur measurement over a very wide concentration range. It uses a horizontal resistance furnace with ceramic tube, which operates in a range from 600 °C to 1550 °C.

The CS-r elemental analyzer meets or exceeds the requirements of all common ASTM, DIN, EN or ISO standards for elemental analysis.

CARBON-SULFUR ANALYZER-CS‑r

Description

TECHNICAL DATA

Measured elements carbon, sulfur
Samples organic
Furnace alignment horizontal (resistance furnace)
Sample carrier ceramic boats
Field of application agriculture, biology, chemistry / plastics, coal / power plant, construction materials, environment / recycling, medicine / pharmaceuticals
Furnace resistance furnace (ceramic tube), adjustable up to 1550 °C (steps of 1 °C)
Detection method solid state infrared absorption
Number of IR cells 1 – 4
Material of IR path gold
Typical analysis time 60 – 180 s
Chemicals required magnesium perchlorate, sodium hydroxide
Gas required oxygen 99.5 % pure (2 – 4 bar / 30 – 60 psi)
Power requirements 230 V, 50/60 H, max. heating up current 20 A
Dimensions (W x H x D) 58 x 52 x 75 cm
Weight ~ 77 kg
Required equipment PC, monitor, balance (resolution 0.0001g)
Optional accessories TIC module

CARBON / SULFUR ANALYZER ELEMENTRAC CS-RFUNCTIONAL PRINCIPLE

In the elemental analyzer CS-r the sample is burnt in an oxygen atmosphere at temperatures up to 1,550 °C. The furnace temperature can be freely selected in steps of 1 °C. The combustion gasses (CO2, H2O, SO2) coming from the furnace and pass through a dust filter. After the water vapor is chemically absorbed, the dried CO2 and SO2 gas is detected in the additional infrared cells. Depending on the configuration, it is possible to combine up to four (for C, S analyzers) infrared cells with different sensitivities.

Content may be subject to modifications or corrections

 

Data sheet

Download product information

Download product information FR

Downloads

BROCHURES

ELTRA PRODUCT OVERVIEW

CUSTOMER MAGAZINE “THE SAMPLE”

CS-580 / CS-580A, CHS-580 / CHS-580A

Contact us

Request a quote

Reviews

There are no reviews yet.

Be the first to review “CARBON / SULFUR ANALYZER CS‑r”

Your email address will not be published. Required fields are marked *

TECHNICAL DATA

Measured elements carbon, sulfur
Samples organic
Furnace alignment horizontal (resistance furnace)
Sample carrier ceramic boats
Field of application agriculture, biology, chemistry / plastics, coal / power plant, construction materials, environment / recycling, medicine / pharmaceuticals
Furnace resistance furnace (ceramic tube), adjustable up to 1550 °C (steps of 1 °C)
Detection method solid state infrared absorption
Number of IR cells 1 – 4
Material of IR path gold
Typical analysis time 60 – 180 s
Chemicals required magnesium perchlorate, sodium hydroxide
Gas required oxygen 99.5 % pure (2 – 4 bar / 30 – 60 psi)
Power requirements 230 V, 50/60 H, max. heating up current 20 A
Dimensions (W x H x D) 58 x 52 x 75 cm
Weight ~ 77 kg
Required equipment PC, monitor, balance (resolution 0.0001g)
Optional accessories TIC module

CARBON / SULFUR ANALYZER ELEMENTRAC CS-RFUNCTIONAL PRINCIPLE

In the elemental analyzer CS-r the sample is burnt in an oxygen atmosphere at temperatures up to 1,550 °C. The furnace temperature can be freely selected in steps of 1 °C. The combustion gasses (CO2, H2O, SO2) coming from the furnace and pass through a dust filter. After the water vapor is chemically absorbed, the dried CO2 and SO2 gas is detected in the additional infrared cells. Depending on the configuration, it is possible to combine up to four (for C, S analyzers) infrared cells with different sensitivities.

Content may be subject to modifications or corrections